Yes. It supports quick parameter switching, no major mechanical adjustments are needed during production change. By calling preset programs via the touchscreen, it can adapt to cargo of different sizes and weights within 10 minutes, meeting small-batch and multi-category production needs.

It is achieved by adjusting the tension control system and heating temperature. PE film requires medium tension (0.8-1.2N) and low heating temperature (50-60℃); degradable film requires low tension (0.3-0.6N) and precise temperature control (45-55℃).

There are three common reasons: first, the positioning sensor is blocked by dust, requiring cleaning of the sensor probe; second, the conveyor speed does not match the positioning rhythm, requiring fine-tuning of servo motor parameters; third, foreign objects at the pallet bottom cause tilting, requiring inspection of pallet flatness and debris cleaning.

The key points are in three parts: for the case erecting machine, check the suction cup tightness and carton guide wheel wear weekly; for the sealing machine, clean the tape cutter and check tape tension daily; for the palletizer, lubricate mechanical joints and calibrate positioning accuracy monthly, and regularly back up system parameters to prevent data loss.

Regular models have a load of 10-30kg; customized models are needed for overweight cargo (over 50kg). Customized models can achieve 50-100kg load by strengthening the robotic arm structure and upgrading the drive motor, and are equipped with dual weight detection, which automatically alarms when overweight to avoid equipment damage and safety accidents.

First, check if the film tension is too high (adjust to 0.5-0.8N), then confirm if the cargo is placed flat (cushioning materials need to be padded at protrusions), and finally check if the conveyor speed is uniform (adjust to 2-3m/min). If wrinkling still occurs, replace the film frame with pre-stretching function to improve film flatness.